• Egress using Wildcard Hosts
    • Background
    • Before you begin
    • Configure direct traffic to a wildcard host
      • Cleanup direct traffic to a wildcard host
    • Configure egress gateway traffic to a wildcard host
      • Wildcard configuration for a single hosting server
        • Cleanup wildcard configuration for a single hosting server
      • Wildcard configuration for arbitrary domains
        • Setup egress gateway with SNI proxy
        • Configure traffic through egress gateway with SNI proxy
        • Cleanup wildcard configuration for arbitrary domains
    • Cleanup
    • 相关内容

    Egress using Wildcard Hosts

    The Control Egress Traffic task andthe Configure an Egress Gateway exampledescribe how to configure egress traffic for specific hostnames, like edition.cnn.com.This example shows how to enable egress traffic for a set of hosts in a common domain, forexample *.wikipedia.org, instead of configuring each and every host separately.

    Background

    Suppose you want to enable egress traffic in Istio for the wikipedia.org sites in all languages.Each version of wikipedia.org in a particular language has its own hostname, e.g., en.wikipedia.org andde.wikipedia.org in the English and the German languages, respectively.You want to enable egress traffic by common configuration items for all the Wikipedia sites,without the need to specify every language’s site separately.

    Before you begin

    • Setup Istio by following the instructions in the Installation guide.

    • Deploy the sleep sample app to use as a test source for sending requests.If you haveautomatic sidecar injectionenabled, run the following command to deploy the sample app:

    Zip

    1. $ kubectl apply -f @samples/sleep/sleep.yaml@

    Otherwise, manually inject the sidecar before deploying the sleep application with the following command:

    Zip

    1. $ kubectl apply -f <(istioctl kube-inject -f @samples/sleep/sleep.yaml@)

    You can use any pod with curl installed as a test source.

    • Set the SOURCE_POD environment variable to the name of your source pod:
    1. $ export SOURCE_POD=$(kubectl get pod -l app=sleep -o jsonpath={.items..metadata.name})

    • Deploy Istio egress gateway.

    • Enable Envoy’s access logging

    Configure direct traffic to a wildcard host

    The first, and simplest, way to access a set of hosts within a common domain is by configuringa simple ServiceEntry with a wildcard host and calling the services directly from the sidecar.When calling services directly (i.e., not via an egress gateway), the configuration fora wildcard host is no different than that of any other (e.g., fully qualified) host,only much more convenient when there are many hosts within the common domain.

    • Define a ServiceEntry and corresponding VirtualSevice for *.wikipedia.org:
    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: ServiceEntry
    4. metadata:
    5.   name: wikipedia
    6. spec:
    7.   hosts:
    8.   - "*.wikipedia.org"
    9.   ports:
    10.   - number: 443
    11.     name: tls
    12.     protocol: TLS
    13. ---
    14. apiVersion: networking.istio.io/v1alpha3
    15. kind: VirtualService
    16. metadata:
    17.   name: wikipedia
    18. spec:
    19.   hosts:
    20.   - "*.wikipedia.org"
    21.   tls:
    22.   - match:
    23.     - port: 443
    24.       sni_hosts:
    25.       - "*.wikipedia.org"
    26.     route:
    27.     - destination:
    28.         host: "*.wikipedia.org"
    29.         port:
    30.           number: 443
    31. EOF
    • Send HTTPS requests tohttps://en.wikipedia.org and https://de.wikipedia.org:
    1. $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    2. <title>Wikipedia, the free encyclopedia</title>
    3. <title>Wikipedia – Die freie Enzyklopädie</title>

    Cleanup direct traffic to a wildcard host

    1. $ kubectl delete serviceentry wikipedia
    2. $ kubectl delete virtualservice wikipedia

    Configure egress gateway traffic to a wildcard host

    The configuration for accessing a wildcard host via an egress gateway depends on whether or notthe set of wildcard domains are served by a single common host.This is the case for *.wikipedia.org. All of the language-specific sites are served by everyone of the wikipedia.org servers. You can route the traffic to an IP of any *.wikipedia.org site,including www.wikipedia.org, and it will manage to serveany specific site.

    In the general case, where all the domain names of a wildcard are not served by a single hosting server,a more complex configuration is required.

    Wildcard configuration for a single hosting server

    When all wildcard hosts are served by a single server, the configuration foregress gateway-based access to a wildcard host is very similar to that of any host, with one exception:the configured route destination will not be the same as the configured host,i.e., the wildcard. It will instead be configured with the host of the single server forthe set of domains.

    • Create an egress Gateway for *.wikipedia.org, a destination rule and a virtual serviceto direct the traffic through the egress gateway and from the egress gateway to the external service.
    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: Gateway
    4. metadata:
    5.   name: istio-egressgateway
    6. spec:
    7.   selector:
    8.     istio: egressgateway
    9.   servers:
    10.   - port:
    11.       number: 443
    12.       name: tls
    13.       protocol: TLS
    14.     hosts:
    15.     - "*.wikipedia.org"
    16.     tls:
    17.       mode: PASSTHROUGH
    18. ---
    19. apiVersion: networking.istio.io/v1alpha3
    20. kind: DestinationRule
    21. metadata:
    22.   name: egressgateway-for-wikipedia
    23. spec:
    24.   host: istio-egressgateway.istio-system.svc.cluster.local
    25.   subsets:
    26.     - name: wikipedia
    27. ---
    28. apiVersion: networking.istio.io/v1alpha3
    29. kind: VirtualService
    30. metadata:
    31.   name: direct-wikipedia-through-egress-gateway
    32. spec:
    33.   hosts:
    34.   - "*.wikipedia.org"
    35.   gateways:
    36.   - mesh
    37.   - istio-egressgateway
    38.   tls:
    39.   - match:
    40.     - gateways:
    41.       - mesh
    42.       port: 443
    43.       sni_hosts:
    44.       - "*.wikipedia.org"
    45.     route:
    46.     - destination:
    47.         host: istio-egressgateway.istio-system.svc.cluster.local
    48.         subset: wikipedia
    49.         port:
    50.           number: 443
    51.       weight: 100
    52.   - match:
    53.     - gateways:
    54.       - istio-egressgateway
    55.       port: 443
    56.       sni_hosts:
    57.       - "*.wikipedia.org"
    58.     route:
    59.     - destination:
    60.         host: www.wikipedia.org
    61.         port:
    62.           number: 443
    63.       weight: 100
    64. EOF
    • Create a ServiceEntry for the destination server, www.wikipedia.org.
    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: ServiceEntry
    4. metadata:
    5.   name: www-wikipedia
    6. spec:
    7.   hosts:
    8.   - www.wikipedia.org
    9.   ports:
    10.   - number: 443
    11.     name: tls
    12.     protocol: TLS
    13.   resolution: DNS
    14. EOF
    • Send HTTPS requests tohttps://en.wikipedia.org and https://de.wikipedia.org:
    1. $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    2. <title>Wikipedia, the free encyclopedia</title>
    3. <title>Wikipedia – Die freie Enzyklopädie</title>
    • Check the statistics of the egress gateway’s proxy for the counter that corresponds to yourrequests to *.wikipedia.org. If Istio is deployed in the istio-system namespace, the command to print thecounter is:
    1. $ kubectl exec -it $(kubectl get pod -l istio=egressgateway -n istio-system -o jsonpath='{.items[0].metadata.name}') -c istio-proxy -n istio-system -- pilot-agent request GET clusters | grep '^outbound|443||www.wikipedia.org.*cx_total:'
    2. outbound|443||www.wikipedia.org::208.80.154.224:443::cx_total::2

    Cleanup wildcard configuration for a single hosting server

    1. $ kubectl delete serviceentry www-wikipedia
    2. $ kubectl delete gateway istio-egressgateway
    3. $ kubectl delete virtualservice direct-wikipedia-through-egress-gateway
    4. $ kubectl delete destinationrule egressgateway-for-wikipedia

    Wildcard configuration for arbitrary domains

    The configuration in the previous section worked because all the *.wikipedia.org sites canbe served by any one of the wikipedia.org servers. However, this is not always the case.For example, you may want to configure egress control for access to more generalwildcard domains like .com or .org.

    Configuring traffic to arbitrary wildcard domains introduces a challenge for Istio gateways. In the previous sectionyou directed the traffic to www.wikipedia.org, which was made known to your gateway during configuration.The gateway, however, would not know the IP address of any arbitrary host it receives in a request.This is due to a limitation of Envoy, the proxy used by the default Istio egress gateway.Envoy routes traffic either to predefined hosts, predefined IP addresses, or to the original destination IP address ofthe request. In the gateway case, the original destination IP of the request is lost since the request is first routedto the egress gateway and its destination IP address is the IP address of the gateway.

    Consequently, the Istio gateway based on Envoy cannot route traffic to an arbitrary host that is not preconfigured,and therefore is unable to perform traffic control for arbitrary wildcard domains.To enable such traffic control for HTTPS, and for any TLS, you need to deploy an SNI forward proxy in addition to Envoy.Envoy will route the requests destined for a wildcard domain to the SNI forward proxy, which, in turn, will forward therequests to the destination specified by the SNI value.

    The egress gateway with SNI proxy and the related parts of the Istio architecture are shown in the following diagram:

    Egress Gateway with SNI proxy

    Egress Gateway with SNI proxy

    The following sections show you how to redeploy the egress gateway with an SNI proxy and then configure Istio to routeHTTPS traffic through the gateway to arbitrary wildcard domains.

    Setup egress gateway with SNI proxy

    In this section you deploy an egress gateway with an SNI proxy in addition to the standard Istio Envoy proxy.This example uses Nginx for the SNI proxy, although any SNI proxy that is capable of routing trafficaccording to arbitrary, not-preconfigured, SNI values would do.The SNI proxy will listen on port 8443, although you can use any port other than the ports specified forthe egress Gateway and for the VirtualServices bound to it.The SNI proxy will forward the traffic to port 443.

    • Create a configuration file for the Nginx SNI proxy. You may want to edit the file to specify additional Nginxsettings, if required. Note that the listen directive of the server specifies port 8443, its proxy_passdirective uses ssl_preread_server_name with port 443 and ssl_preread is on to enable SNI reading.
    1. $ cat <<EOF > ./sni-proxy.conf
    2. user www-data;
    4. events {
    5. }
    7. stream {
    8.   log_format log_stream '\$remote_addr [\$time_local] \$protocol [\$ssl_preread_server_name]'
    9.   '\$status \$bytes_sent \$bytes_received \$session_time';
    11.   access_log /var/log/nginx/access.log log_stream;
    12.   error_log  /var/log/nginx/error.log;
    14.   # tcp forward proxy by SNI
    15.   server {
    16.     resolver 8.8.8.8 ipv6=off;
    17.     listen       127.0.0.1:8443;
    18.     proxy_pass   \$ssl_preread_server_name:443;
    19.     ssl_preread  on;
    20.   }
    21. }
    22. EOF
    • Create a Kubernetes ConfigMapto hold the configuration of the Nginx SNI proxy:
    1. $ kubectl create configmap egress-sni-proxy-configmap -n istio-system --from-file=nginx.conf=./sni-proxy.conf
    • The following command will generate istio-egressgateway-with-sni-proxy.yaml which you can optionally edit and then deploy.
    1. $ cat <<EOF | istioctl manifest generate --set values.global.istioNamespace=istio-system -f - > ./istio-egressgateway-with-sni-proxy.yaml
    2. gateways:
    3.   enabled: true
    4.   istio-ingressgateway:
    5.     enabled: false
    6.   istio-egressgateway:
    7.     enabled: false
    8.   istio-egressgateway-with-sni-proxy:
    9.     enabled: true
    10.     labels:
    11.       app: istio-egressgateway-with-sni-proxy
    12.       istio: egressgateway-with-sni-proxy
    13.     replicaCount: 1
    14.     autoscaleMin: 1
    15.     autoscaleMax: 5
    16.     cpu:
    17.       targetAverageUtilization: 80
    18.     serviceAnnotations: {}
    19.     type: ClusterIP
    20.     ports:
    21.       - port: 443
    22.         name: https
    23.     secretVolumes:
    24.       - name: egressgateway-certs
    25.         secretName: istio-egressgateway-certs
    26.         mountPath: /etc/istio/egressgateway-certs
    27.       - name: egressgateway-ca-certs
    28.         secretName: istio-egressgateway-ca-certs
    29.         mountPath: /etc/istio/egressgateway-ca-certs
    30.     configVolumes:
    31.       - name: sni-proxy-config
    32.         configMapName: egress-sni-proxy-configmap
    33.     additionalContainers:
    34.     - name: sni-proxy
    35.       image: nginx
    36.       volumeMounts:
    37.       - name: sni-proxy-config
    38.         mountPath: /etc/nginx
    39.         readOnly: true
    40. EOF
    • Deploy the new egress gateway:
    1. $ kubectl apply -f ./istio-egressgateway-with-sni-proxy.yaml
    2. serviceaccount "istio-egressgateway-with-sni-proxy-service-account" created
    3. role "istio-egressgateway-with-sni-proxy-istio-system" created
    4. rolebinding "istio-egressgateway-with-sni-proxy-istio-system" created
    5. service "istio-egressgateway-with-sni-proxy" created
    6. deployment "istio-egressgateway-with-sni-proxy" created
    7. horizontalpodautoscaler "istio-egressgateway-with-sni-proxy" created
    • Verify that the new egress gateway is running. Note that the pod has two containers (one is the Envoy proxy and thesecond one is the SNI proxy).
    1. $ kubectl get pod -l istio=egressgateway-with-sni-proxy -n istio-system
    2. NAME                                                  READY     STATUS    RESTARTS   AGE
    3. istio-egressgateway-with-sni-proxy-79f6744569-pf9t2   2/2       Running   0          17s
    • Create a service entry with a static address equal to 127.0.0.1 (localhost), and disable mutual TLS for traffic directed to the newservice entry:
    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: ServiceEntry
    4. metadata:
    5.   name: sni-proxy
    6. spec:
    7.   hosts:
    8.   - sni-proxy.local
    9.   location: MESH_EXTERNAL
    10.   ports:
    11.   - number: 8443
    12.     name: tcp
    13.     protocol: TCP
    14.   resolution: STATIC
    15.   endpoints:
    16.   - address: 127.0.0.1
    17. ---
    18. apiVersion: networking.istio.io/v1alpha3
    19. kind: DestinationRule
    20. metadata:
    21.   name: disable-mtls-for-sni-proxy
    22. spec:
    23.   host: sni-proxy.local
    24.   trafficPolicy:
    25.     tls:
    26.       mode: DISABLE
    27. EOF

    Configure traffic through egress gateway with SNI proxy

    • Define a ServiceEntry for *.wikipedia.org:
    1. $ cat <<EOF | kubectl create -f -
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: ServiceEntry
    4. metadata:
    5.   name: wikipedia
    6. spec:
    7.   hosts:
    8.   - "*.wikipedia.org"
    9.   ports:
    10.   - number: 443
    11.     name: tls
    12.     protocol: TLS
    13. EOF
    • Create an egress Gateway for *.wikipedia.org, port 443, protocol TLS, and a virtual service to direct thetraffic destined for *.wikipedia.org through the gateway.

    Choose the instructions corresponding to whether or not you want to enablemutual TLS Authentication between the source pod and the egress gateway.

    You may want to enable mutual TLS to let the egress gateway monitor the identity of the source pods and to enable Mixer policy enforcement based on that identity.

    mutual TLS enabledmutual TLS disabled

    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: Gateway
    4. metadata:
    5.   name: istio-egressgateway-with-sni-proxy
    6. spec:
    7.   selector:
    8.     istio: egressgateway-with-sni-proxy
    9.   servers:
    10.   - port:
    11.       number: 443
    12.       name: tls-egress
    13.       protocol: TLS
    14.     hosts:
    15.     - "*.wikipedia.org"
    16.     tls:
    17.       mode: MUTUAL
    18.       serverCertificate: /etc/certs/cert-chain.pem
    19.       privateKey: /etc/certs/key.pem
    20.       caCertificates: /etc/certs/root-cert.pem
    21. ---
    22. apiVersion: networking.istio.io/v1alpha3
    23. kind: DestinationRule
    24. metadata:
    25.   name: egressgateway-for-wikipedia
    26. spec:
    27.   host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
    28.   subsets:
    29.     - name: wikipedia
    30.       trafficPolicy:
    31.         loadBalancer:
    32.           simple: ROUND_ROBIN
    33.         portLevelSettings:
    34.         - port:
    35.             number: 443
    36.           tls:
    37.             mode: ISTIO_MUTUAL
    38. ---
    39. apiVersion: networking.istio.io/v1alpha3
    40. kind: VirtualService
    41. metadata:
    42.   name: direct-wikipedia-through-egress-gateway
    43. spec:
    44.   hosts:
    45.   - "*.wikipedia.org"
    46.   gateways:
    47.   - mesh
    48.   - istio-egressgateway-with-sni-proxy
    49.   tls:
    50.   - match:
    51.     - gateways:
    52.       - mesh
    53.       port: 443
    54.       sni_hosts:
    55.       - "*.wikipedia.org"
    56.     route:
    57.     - destination:
    58.         host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
    59.         subset: wikipedia
    60.         port:
    61.           number: 443
    62.       weight: 100
    63.   tcp:
    64.   - match:
    65.     - gateways:
    66.       - istio-egressgateway-with-sni-proxy
    67.       port: 443
    68.     route:
    69.     - destination:
    70.         host: sni-proxy.local
    71.         port:
    72.           number: 8443
    73.       weight: 100
    74. ---
    75. # The following filter is used to forward the original SNI (sent by the application) as the SNI of the mutual TLS
    76. # connection.
    77. # The forwarded SNI will be reported to Mixer so that policies will be enforced based on the original SNI value.
    78. apiVersion: networking.istio.io/v1alpha3
    79. kind: EnvoyFilter
    80. metadata:
    81.   name: forward-downstream-sni
    82. spec:
    83.   filters:
    84.   - listenerMatch:
    85.       portNumber: 443
    86.       listenerType: SIDECAR_OUTBOUND
    87.     filterName: forward_downstream_sni
    88.     filterType: NETWORK
    89.     filterConfig: {}
    90. ---
    91. # The following filter verifies that the SNI of the mutual TLS connection (the SNI reported to Mixer) is
    92. # identical to the original SNI issued by the application (the SNI used for routing by the SNI proxy).
    93. # The filter prevents Mixer from being deceived by a malicious application: routing to one SNI while
    94. # reporting some other value of SNI. If the original SNI does not match the SNI of the mutual TLS connection, the
    95. # filter will block the connection to the external service.
    96. apiVersion: networking.istio.io/v1alpha3
    97. kind: EnvoyFilter
    98. metadata:
    99.   name: egress-gateway-sni-verifier
    100. spec:
    101.   workloadLabels:
    102.     app: istio-egressgateway-with-sni-proxy
    103.   filters:
    104.   - listenerMatch:
    105.       portNumber: 443
    106.       listenerType: GATEWAY
    107.     filterName: sni_verifier
    108.     filterType: NETWORK
    109.     filterConfig: {}
    110. EOF
    1. $ kubectl apply -f - <<EOF
    2. apiVersion: networking.istio.io/v1alpha3
    3. kind: Gateway
    4. metadata:
    5.  name: istio-egressgateway-with-sni-proxy
    6. spec:
    7.  selector:
    8.    istio: egressgateway-with-sni-proxy
    9.  servers:
    10.  - port:
    11.      number: 443
    12.      name: tls
    13.      protocol: TLS
    14.    hosts:
    15.    - "*.wikipedia.org"
    16.    tls:
    17.      mode: PASSTHROUGH
    18. ---
    19. apiVersion: networking.istio.io/v1alpha3
    20. kind: DestinationRule
    21. metadata:
    22.  name: egressgateway-for-wikipedia
    23. spec:
    24.  host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
    25.  subsets:
    26.    - name: wikipedia
    27. ---
    28. apiVersion: networking.istio.io/v1alpha3
    29. kind: VirtualService
    30. metadata:
    31.  name: direct-wikipedia-through-egress-gateway
    32. spec:
    33.  hosts:
    34.  - "*.wikipedia.org"
    35.  gateways:
    36.  - mesh
    37.  - istio-egressgateway-with-sni-proxy
    38.  tls:
    39.  - match:
    40.    - gateways:
    41.      - mesh
    42.      port: 443
    43.      sni_hosts:
    44.      - "*.wikipedia.org"
    45.    route:
    46.    - destination:
    47.        host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
    48.        subset: wikipedia
    49.        port:
    50.          number: 443
    51.      weight: 100
    52.  - match:
    53.    - gateways:
    54.      - istio-egressgateway-with-sni-proxy
    55.      port: 443
    56.      sni_hosts:
    57.      - "*.wikipedia.org"
    58.    route:
    59.    - destination:
    60.        host: sni-proxy.local
    61.        port:
    62.          number: 8443
    63.      weight: 100
    64. EOF
    • Send HTTPS requests tohttps://en.wikipedia.org and https://de.wikipedia.org:
    1. $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    2. <title>Wikipedia, the free encyclopedia</title>
    3. <title>Wikipedia – Die freie Enzyklopädie</title>
    • Check the log of the egress gateway’s Envoy proxy. If Istio is deployed in the istio-system namespace, the command toprint the log is:
    1. $ kubectl logs -l istio=egressgateway-with-sni-proxy -c istio-proxy -n istio-system

    You should see lines similar to the following:

    1. [2019-01-02T16:34:23.312Z] "- - -" 0 - 578 79141 624 - "-" "-" "-" "-" "127.0.0.1:8443" outbound|8443||sni-proxy.local 127.0.0.1:55018 172.30.109.84:443 172.30.109.112:45346 en.wikipedia.org
    2. [2019-01-02T16:34:24.079Z] "- - -" 0 - 586 65770 638 - "-" "-" "-" "-" "127.0.0.1:8443" outbound|8443||sni-proxy.local 127.0.0.1:55034 172.30.109.84:443 172.30.109.112:45362 de.wikipedia.org
    • Check the logs of the SNI proxy. If Istio is deployed in the istio-system namespace, the command to print thelog is:
    1. $ kubectl logs -l istio=egressgateway-with-sni-proxy -n istio-system -c sni-proxy
    2. 127.0.0.1 [01/Aug/2018:15:32:02 +0000] TCP [en.wikipedia.org]200 81513 280 0.600
    3. 127.0.0.1 [01/Aug/2018:15:32:03 +0000] TCP [de.wikipedia.org]200 67745 291 0.659
    • Check the mixer log. If Istio is deployed in the istio-system namespace, the command to print thelog is:
    1. $ kubectl -n istio-system logs -l istio-mixer-type=telemetry -c mixer | grep '"connectionEvent":"open"' | grep '"sourceName":"istio-egressgateway' | grep 'wikipedia.org'
    2. {"level":"info","time":"2018-08-26T16:16:34.784571Z","instance":"tcpaccesslog.logentry.istio-system","connectionDuration":"0s","connectionEvent":"open","connection_security_policy":"unknown","destinationApp":"","destinationIp":"127.0.0.1","destinationName":"unknown","destinationNamespace":"default","destinationOwner":"unknown","destinationPrincipal":"cluster.local/ns/istio-system/sa/istio-egressgateway-with-sni-proxy-service-account","destinationServiceHost":"","destinationWorkload":"unknown","protocol":"tcp","receivedBytes":298,"reporter":"source","requestedServerName":"en.wikipedia.org","sentBytes":0,"sourceApp":"istio-egressgateway-with-sni-proxy","sourceIp":"172.30.146.88","sourceName":"istio-egressgateway-with-sni-proxy-7c4f7868fb-rc8pr","sourceNamespace":"istio-system","sourceOwner":"kubernetes://apis/extensions/v1beta1/namespaces/istio-system/deployments/istio-egressgateway-with-sni-proxy","sourcePrincipal":"cluster.local/ns/sleep/sa/default","sourceWorkload":"istio-egressgateway-with-sni-proxy","totalReceivedBytes":298,"totalSentBytes":0}

    Note the requestedServerName attribute.

    Cleanup wildcard configuration for arbitrary domains

    • Delete the configuration items for *.wikipedia.org:
    1. $ kubectl delete serviceentry wikipedia
    2. $ kubectl delete gateway istio-egressgateway-with-sni-proxy
    3. $ kubectl delete virtualservice direct-wikipedia-through-egress-gateway
    4. $ kubectl delete destinationrule egressgateway-for-wikipedia
    5. $ kubectl delete --ignore-not-found=true envoyfilter forward-downstream-sni egress-gateway-sni-verifier
    • Delete the configuration items for the egressgateway-with-sni-proxy Deployment:
    1. $ kubectl delete serviceentry sni-proxy
    2. $ kubectl delete destinationrule disable-mtls-for-sni-proxy
    3. $ kubectl delete -f ./istio-egressgateway-with-sni-proxy.yaml
    4. $ kubectl delete configmap egress-sni-proxy-configmap -n istio-system
    • Remove the configuration files you created:
    1. $ rm ./istio-egressgateway-with-sni-proxy.yaml
    2. $ rm ./sni-proxy.conf

    Cleanup

    Shutdown the sleep service:

    Zip

    1. $ kubectl delete -f @samples/sleep/sleep.yaml@

    相关内容

    Secure Control of Egress Traffic in Istio, part 3

    Comparison of alternative solutions to control egress traffic including performance considerations.

    Secure Control of Egress Traffic in Istio, part 2

    Use Istio Egress Traffic Control to prevent attacks involving egress traffic.

    Secure Control of Egress Traffic in Istio, part 1

    Attacks involving egress traffic and requirements for egress traffic control.

    Egress Gateway Performance Investigation

    Verifies the performance impact of adding an egress gateway.

    Consuming External MongoDB Services

    Describes a simple scenario based on Istio's Bookinfo example.

    Monitoring and Access Policies for HTTP Egress Traffic

    Describes how to configure Istio for monitoring and access policies of HTTP egress traffic.